tutorial – Gainesville Hackerspace

Hackerspace Maker Coin – Onshape

Using this tutorial, you should be able to create the line drawings in Onshape that is used to create the Gainesville Hackerspace MakerCoin.Onshape is a Web Based 3D Parametric CAD…Continue readingHackerspace Maker Coin – Onshape

Laser Cutting Hackerspace MakerCoin

If you have followed any of the tutorials on performing the CAD work on the Hackerspace MakerCoin (Fusion 360, OnShape, CamBam), then this step will take you from the CAD…Continue readingLaser Cutting Hackerspace MakerCoin

Hackerspace Maker Coin – Fusion 360

Using this tutorial, you should be able to create the line drawings in Autodesk Fusion 360 that is used to create the Gainesville Hackerspace MakerCoin. Create a new document Create…Continue readingHackerspace Maker Coin – Fusion 360

Hackerspace Maker Coin – CamBam Plus

Using this tutorial, you should be able to create the line drawings in CamBam that is used to create the Gainesville Hackerspace Maker Coin. Open the CamBam plus Application.…Continue readingHackerspace Maker Coin – CamBam Plus

Phone Stand Tutorial

This tutorial will walk you through creating a custom Phone Stand using Onshape, a free browser-based CAD program. This Phone Stand is a perfect beginner project for learning Computer Aided Design (CAD).…Continue readingPhone Stand Tutorial

Nametag Tutorial

u through creating a custom Nametag using Onshape, a free browser-based CAD program. Nametags are a perfect beginner project for learning Computer Aided Design (CAD).…Continue readingNametag Tutorial