Skip to content
  • Emailinfo@gainesvillehackerspace.org
  • Address2803 NW 6th St Gainesville, FL 32609
  • Open HoursOpen House, Tuesdays 7pm
  • Emailinfo@gainesvillehackerspace.org
  • Address2803 NW 6th St Gainesville, FL 32609
  • Open HoursOpen House, Tuesdays 7pm
Gainesville Hackerspace

Gainesville Hackerspace

LEARN. BUILD. SHARE.

  • Calendar
  • About
    • About Us
    • Policy Document
    • Bylaws
    • Donations
  • Membership
    • Apply to Join Today
    • Membership Application
    • Pay Dues
    • Membership Cancellation
  • Report a Problem
  • Locations
  • Contact Us
  • Wiki
Search
  1. Home
  2. Wiki - Article

Tag: Maker Coin

Hackerspace Maker Coin – Onshape

Using this tutorial, you should be able to create the line drawings in Onshape that is used to create the Gainesville Hackerspace MakerCoin.Onshape is a Web Based 3D Parametric CAD…Continue readingHackerspace Maker Coin – Onshape

Laser Cutting Hackerspace MakerCoin

If you have followed any of the tutorials on performing the CAD work on the Hackerspace MakerCoin (Fusion 360, OnShape, CamBam), then this step will take you from the CAD…Continue readingLaser Cutting Hackerspace MakerCoin

Hackerspace Maker Coin – Fusion 360

Using this tutorial, you should be able to create the line drawings in Autodesk Fusion 360 that is used to create the Gainesville Hackerspace MakerCoin. Create a new document Create…Continue readingHackerspace Maker Coin – Fusion 360

Hackerspace Maker Coin – CamBam Plus

Using this tutorial, you should be able to create the line drawings in CamBam that is used to create the Gainesville Hackerspace Maker Coin.   Open the CamBam plus Application.…Continue readingHackerspace Maker Coin – CamBam Plus

Copyright © 2023 Gainesville Hackerspace | Versatile Business by Firefly Themes
Scroll Up